Guest Lab Consultant Libby Knollmeyer: What to Expect When You’re Expecting (or Not Expecting) a Lab Inspection
Prior to CLIA ’88 (Clinical Laboratory Improvement Amendments of 1988) only laboratories participating in interstate commerce underwent inspections. Since the enactment of CLIA ’88, all laboratories are subject to inspection, and all non-waived laboratories are inspected. CLIA has the right to appear at any point in time to inspect a lab.
There are two types of inspections for non-waived labs: routine and non-routine
Routine inspections take place every two years as mandated by CLIA, regardless of which agency is responsible for the inspection. If a lab has a Certificate of Compliance, CLIA will be the inspecting agency. If the laboratory has opted for a Certificate of Accreditation from one of the approved accrediting agencies, that agency will perform the inspection. Either way, the inspections are set on a two year cycle and the renewal of the laboratory’s certificate is dependent upon successful completion of the inspection. If no deficiencies are cited, the certificate will be renewed very soon after the inspection is completed. If deficiencies are cited during the inspection, the laboratory will receive a deficiency report and will be given a timeline to submit a plan of correction. Once the plan of correction is accepted by the inspecting agency, the certificate will be renewed. Failure to achieve a successful conclusion to the inspection process will result in the cancellation of the lab’s certificate, and therefore loss of privileges to do lab testing and to bill for lab testing.
The inspection cycle differs slightly for a newly set-up laboratory. CLIA or the accrediting agency will come in to do an inspection after the lab has been in operation for 3 – 6 months to ensure everything required is in place and all regulations are being followed. CLIA and the accrediting agencies do not inspect prior to the lab starting testing operations because they want the lab to generate data for them to review upon their inspection.
Posted in: Day-to-Day Operations, GeneralLeave a Comment (0) →